filling and capping machine Liquid Filling And Capping Machine

KPPW-4    4-head Liquid Filling and Capping Machine

I. Introduction

The machine can complete automatic filling, automatic cap-on and automatic cap screwing. With the reasonable design, only one operator is needed to feed the bottles. KPPW-4 is widely used in pharmacy, food, cosmetics industry, such as shampoo, moisturizing water, edible oil, pharmacy liquid. Our machine uses exclusive mechanical hand and the leading system to ensure the cap sit in the right position and realize a full automation. The most part of the machine is made from SS304. For special material, the contacting part is SS316L, which is able to reach the GMP standard.

II. Features

1. The filling & capping machine can equipment with a dust cover. No bottle no filling. 

2. The filling system is applied with the plunger pump, which has a high filling precision and a large dosage range

3. The plunger pump filling system does not absorb the material. It is heat-resistant and corrosion resisting. It has an overwhelming advantage when the material has a corrosive feature.

4. The machine is installed with a low level storage hopper which makes the cleaning and disinfection easier.

5. It is applicable to all kinds of viscous and non-viscous liquids

6. Special mechanical hand design the cap leading system

7. The filling nozzle goes down to the bottom of the bottle for filling, preventing bubbles

8. The machine is filling and capping in one, occupying small room

9. Claw design head-screwing design which is easy to adjust the tightness

10. GMP standard design

   http://www.kingpack-cn.com